If your crops could tell you what they need,

when they need it, how much more profitable would your operation be? With our irrigation management tools, they can.

Our weather stations accurately measure temperature, humidity, barometric pressure, heat index, dew point, wet bulb, wind speed, wind direction, rainfall, wind chill and more. All that data is then delivered to the palm of your hand via access on Highland Hub, keeping you up to speed with fresh data every 5 minutes.

WeatherTree™

Wireless Weather Station Specifications

  • Wind / Rain Rack
  • Wind Anemometer: Measures wind speed from 0 to 160 kph (0 to 100 mph) with ± 10% accuracy
  • Wind Vane: Measures 8 cardinal directions (N, NE, E, SE, S, SW, W, NW)
  • Rain Bucket: Resolution of 0.254mm (0.01”) with ± 10% accuracy
  • Sensirion SHT31 Temperature / Humidity Sensor
  • Typical Relative Humidity Accuracy ± 5% @ 0-100% RH
  • Typical Temperature Accuracy ± 1°C @ -40°C to 60°C (-40°F to 140°F)
  • NXP Semiconductors MPL3115A2 Barometric Pressure Sensor
  • Typical Absolute Pressure Accuracy ±0.4 hPa @ 500-1100 hPa @ -10-50°C
  • Fan Aspirated Solar Radiation Shield for the Temperature/ Humidity Sensor
  • Cellular LTE Cat M1 data modem
  • 3.5 Watt Solar Panel
  • 3.7 Volt / 1100 mA Hours LIPO Battery
  • Watertight Housing Enclosure Level IPX3

Hub Weather Station App

Access weather stations remotely with your devices.

With Highland Hub, we enable growers to study the past, see the present and plant for the future. Food safety programs and all record keeping is virtual, while monitoring critical control points, crop protection usages and input costs.

The WeatherTree™ is easy to install and activate, and is fully integrated into the Highland Hub.

See the present, so you can plant for the future.

Get detailed specs on our WeatherTree™

WeatherTree™ PDF Contact Us

Soil Probe Specifications

  • Robust probe and easy installation
  • Fully encapsulated electronics
  • Tapered shape allows for extremely fast installation inmajority of soil types
  • Ability to measure the true soil profile, not slurry
  • Buriable to any depth
  • Sentek-proven quality soil moisture and salinity measurements
  • Pre-normalised sensors with inbuilt default calibration equations
  • Access soil profile data through Highland Hub
  • Probe Lengths: 60cm (24”) & 120cm (48”)
  • Number of Sensors 60cm: 6 | 120cm: 12
  • Sensor types include: Moisture, Temperature & Salinity
  • Resolution: Moisture = 1:10,000 | Salinity = 1:6,000
  • Temperature resolution = 0.3ºC
  • Moisture precision: +/- 0.03% vol.
  • Temperature accuracy: +/- 2ºC @ 25ºC
  • Operating temperature: -20ºC to 60ºC

Want More Information on our Soil Probes?

Soil Probe PDF Contact Us